How to make a triple switch in place of a double?
1
answer289
viewsGood afternoon. I have a question on electrics. Is it possible to make a triple switch in place of a double? A team of workers made the wiring under the double, but now it turned out that there will be three light sources. Is there any way out of this situation? Thanks for answers.
Visitors Comments
Add a comment
How much does it cost to connect gas to a private house: the price of organizing gas supply 
The best washing machines with dryer: model rating and customer tips 
What is the color temperature of light and the nuances of choosing the temperature of the lamps to suit your needs 
Replacement of a geyser in an apartment: replacement paperwork + basic norms and requirements
Good afternoon, Wanda.
The solution is very simple - you need to purchase a three-key switch, and give the builders a task to forward the route to the third lamp. The traditional solution to the problem can not do without wall chipping under additional wires. In the diagram, I quote the solid lines laid by the builders and the dashed lines - the wires that should be laid.
Strobing can be minimized by purchasing a HiTE PRO LE-1 radio switch. Still, you will have to forward the wires from the distribution box, but install the switch that looks like an ordinary switch in a convenient place - you will not have to pull the phase on it. Such a switch acts as a signal generator, which is received by the on / off unit of the lamp. The unit itself, which fits even in the base of the sconce, can provide control of a maximum of 1 kilowatt lamp. The range of the switch is 250 meters. The switch is equipped with a CR2032 battery that lasts 7 years. The electrical wiring that will have to be laid will have a minimum length compared to option No. 1.
Finally, if an additional lamp was needed in the hallway, corridor, you can buy IT-BAT 01 - it has miniature LED bulbs, is powered by three AAA batteries, and is controlled by a motion sensor. This option does not require wiring at all.