Electronic Bidet Covers: Selection Tips and an Overview of the Best Manufacturers

Multifunctional electronic bidet covers belong to the elite plumbing. In terms of comfort, no other plumbing fixture can be compared with this device. They are intended for hygienic procedures after visiting the toilet and are able to completely replace the traditional bidet.

This option looks very attractive, especially for compact bathrooms, where to place both the toilet and the bidet is problematic, agree?

We offer to deal with the device, the principle of operation, the advantages and disadvantages of the miracle cover. To help you with the choice, we have prepared an overview of the best toilet accessories, and the detailed instructions will come in handy for those who decide to install the cover themselves.

Bidet electronic cover device

Structurally, the electronic lid of the bidet is simple and consists of 2 main parts: the seat and the lid closing the toilet. The main difference between a useful and convenient device is the presence of a control panel. The designers placed it on the side.

Water is supplied through a retractable cock built into the seat. You can activate it by pressing the button on the remote control. For drying, there is a special nozzle that supplies heated air.

On average, up to 13 buttons can be placed on the remote control. In addition to 2 washing buttons - quick and vibration and drying ‚on it there is an opportunity to actuate a massage jet‚ to regulate the temperature of water ‚drying and the seat itself.

Equipped with a remote control and a special button for children ‚deodorization button. You can turn on energy-saving mode ‚adjust and clean the tip.

Each individual model of the electronic bidet cover has its own set of functions. They are controlled by buttons on the remote control (+)

Advantages and disadvantages of the electronic cover

The main benefit of buying an electronic bidet cover is that all amenities will be in one place.Its presence allows you to perform all hygiene procedures, eliminating the transplantation from one plumbing fixture to another from this process.

The whole list of advantages consists of several points:

1. Space saving. The ability to turn a standard toilet into a device 2 in one - a toilet plus a bidet.
2. Versatility. The lid design can be installed on most toilets. They use it both for the home bathroom and in other places - sanatoria, clinics, beauty salons, and hotels.
3. Functionality. The presence of convenient additional options and several modes allowing anyone to feel comfortable.
4. Hygiene. Using a bidet cover is an excellent prevention of infections and inflammations ‚because All procedures are carried out by a contactless method. Some caps have an antibacterial coating.
5. Self cleaning. The presence of automatic cleaning washer nozzles.
6. Easy installation‚Thanks to the detailed manual attached to the device.
7. Air purification function. In some models, this is done using a fan mounted in the cover. In this case, the cover is connected to the ventilation shaft. In others, the presence of a carbon filter ‚preventing the formation of unpleasant odors solves the problem.
8. Saving. It becomes superfluous to purchase toilet paper.

It is possible to connect only to the cold water supply line. The design includes heating elements that heat water before delivery.

Despite all the obvious advantages, some are confused by the fact that the lid may not be suitable for an already installed toilet. This problem is solved simply: before going to the plumbing salon, you need to take measurements.

The second significant disadvantage for many is the high cost of a bidet cover. She really has a considerable price - at least $ 500, but does our well-being cost more?

Such a device is especially necessary in the house where one of the family members suffers from hemorrhoids. They will appreciate both gentle massage and delicate cleansing.

Methods for sizing a bidet cover

First, the distance between the centers of the fastener points is measured. On modern toilets issued by companies Panasonic‚ Geberit‚ Roca It is adjustable from 0.8 to 1 cm.

You should also make measurements of the length of the toilet bowl inside and the gap between the fasteners and the edge of the bowl. An important parameter is the step between the edge of the toilet and the drain tank.

It is important to consider the size of the cover control unit.

Measurements to be taken before choosing a bidet cover. A - the distance between the bolts ‚B - the internal length of the toilet bowl‚ C - the edge of the bowl - fasteners ‚D - the edge of the toilet bowl - drain tank

There is an easier way to choose a cover - to make a piece of cardboard, outlining the outline of the toilet. If toilet is installed with non-standard geometry ‚a bidet cover can be ordered for it. When choosing a cover ‚in addition to dimensions‚ it is important to take into account the geometry of the drain tank.

The cover ‚in its rear part‚ must repeat it exactly ‚otherwise the correct installation is impossible.

Manufacturers of smart toilet lids

The leading manufacturers of electronic bidet covers are:

• Izumi‚ Panasonic ‚ Sato‚ Senspa - Japan;
• Geberit - Switzerland;
• Yoyo‚ Nanobidet‚ LS Daewon - South Korea;
• Roca - Spain.

Basically, all covers manufactured by these companies have standardized sizes ‚therefore suitable for different types of toilets.

SATO Bidet Covers

These caps were created by the efforts of designers in Japan. They are very technological and modern. There are different models of these devices, differing in size. Factories ‚producing the product‚ are located in South Korea. They are equipped with the latest equipment, and control over product quality is carried out by engineers from Japan.

In the photo, the bidet cover is SATO DB300 round. This is the best-selling model in Russia. It goes on sale mainly in 2 sizes: S - short and M - round. The latter option is the most common because has universal parameters

The design includes a nozzle of a combined type ‚storage water heater‚ adjustable seat heating. The functionality of the lid allows both general washing ‚and use of a bidet for women‚ children.

You can perform a massage, apply an enema by increasing the pressure of the stream, adjust the drying temperature, soften water, change the position of the nozzle and perform other actions. The manufacturer gives a guarantee for 5 years.

Japanese brand Izumi

Bidet cover Izumi ‚ installed in place of a standard toilet seat is more than just a bidet.

By pressing the corresponding button on the Izumi lid, the nozzle is activated, heated and cold water is mixed, or just the latter is heated, pressure and temperature are regulated, seats are heated, hydromassage, drying, enema are performed

This is a miracle of engineering ‚with many functions‚ is powered from a 220 V socket with a current frequency of 50-60 Hz. It consumes a maximum of 1347 watts ‚for normal operation it is necessary to provide a pressure of about 0.75 bar. The lid weighs 4.8 kg with dimensions of 48.7 * 50.5 * 15.4 cm.

The creators of Izumi paid special attention to its safe operation. It is equipped with a circuit breaker ‚tripping in case of current leakage‚ fuse ‚thermal switch.

The Izumi bidet cover is compatible with the company’s model of toilet and wall hung toilets. Roca‚ Laufen‚ Duravit‚ Vidima‚ Jacob delafon‚ Vitra‚ Santek‚ Keramin‚ IFO‚ SMARTsant‚ Villeroy & boch‚ Della‚ GSI‚ Kerasan and some others.

Panasonic Universal Cover

Complete comfort and pleasant sensations when performing hygiene procedures allows you to feel the Panasonic cover with great functionality. Its universality lies in the fact that it is equally convenient for representatives of both sexes, as well as for children and even for the disabled.

For the production of the product only environmentally friendly material is used.

An electronic lid with the Panasonic bidet function brings comfort to the bathroom. It allows you to save energy. It has many operating modes and at the same time is compact and easy to operate and maintain.

Panasonic covers are equipped with micro-lifts ‚therefore they close smoothly‚ without creating any noise. Its weight is only 4.6 kg, and overall dimensions are 47.7 * 52.9 * 18.2 cm. The warranty given by the manufacturer is 1 g.

YOYO caps from South Korea

Bidet covers QUOSS or YOYO comply with European standards. They have several massage modes ‚they can be customized taking into account the anatomical features of a particular person. Low pressure in the water supply system compensates for the air pump mounted in the cover.

Pictured is the cover kit for the bidet Cover QUOSS Q-7700. Two sizes of execution are possible: S - short, L - long

The new model is complemented by aroma sachets, UV illumination, water shut-off valves, and elongated hoses. Instead of a water pump, an air pump was installed in it, which allowed to increase the pressure to create an aerated stream. As well as designers updated and improved electronics. The warranty period established by the manufacturer is 2 g.

Rock electronic covers

A huge number of models of bidet covers are produced under this brand. A special place among them is Roca multiclin advance. It is characterized by great functionality.

Roca multiclin advance is equipped with a convenient liquid crystal control panel. It is combined with Senso ‚Hall‚ Dama toilets both hanging ‚and installed on the floor

This is a removable seat with antibacterial coating, equipped with heating and lighting. It closes gently ‚has‚ as an addition ‚mechanical control. It controls a 5-level water pressure and 3-level air temperature. Suitable model for smart home systems.

Nanobidet Bidet Cover

In the line Nanobidet not so long ago a new model appeared - Montecarlo Premium. It is programmed to perform 47 functions.

Equipped with instantaneous water heater ‚built-in sensor‚ controlling cover lifting ‚night illumination‚ remote control ‚presence sensor‚ Bidet ‚Turbo‚ Children ‚Super Bidet modes.

The MonteCarlo nanobide has convenient dimensions - 48.7 cm in width ‚50.5 in length‚ 15.4 cm in height and weighs about 4.5 kg. Here you can adjust the nozzle overhang. The filter purifies water using silver ions

Make a plastic bidet cover Duroplast. It is designed specifically for the production of sanitary products ‚is of high quality‚ impact and heat resistance. It also has antibacterial properties and increased resistance to mechanical damage.

Geberit Bidet Cover

These covers combine with most toilets that have an oval-shaped bowl. The product cannot be called cheap - the cost starts in the area of ​​600 euros, but if you take a high-quality freestanding bidet, the price is almost the same. But revenge will be saved - there you can install and connect a washing machine.

Cover Geberit AquaClean 5000plus. It consumes 850 watts of power. When you turn on the saving mode, the consumption decreases to 1 W, and when the heating is working - up to 6.7 W

The seat can withstand loads of up to 150 kg. The cycle of washing with water, heated to 37 ° C, lasts about 20 seconds. You can adjust the temperature in the range from 10 ° C to 39 ° C. Water consumption is 0.08 l / s.

Bidet Cover SensPa

All lid components Senspa made in Japan using high quality materials. Assembly is carried out in South Korea. There is a wide range of these products on the market with different sizes.

The UB-7035 model is combined with toilets having a length of 490 and more mm. The tank is taken as the starting point when measuring, and the external front edge of the toilet bowl is taken as the final point. For fastening on the toilet, there should be holes with an intercenter distance of 140 - 200 mm (+)

New in 2017 is the model SensPa JK750C class "Standard". It is equipped with a number of functions necessary for hygiene and comfort.

It goes on sale in 3 different forms. The kit includes a nozzle with an antibacterial coating. In its arsenal of only 33 functions. It also has seven hygiene functions and 10 comfort functions. Warranty - 2 years.

Installing the electronic bidet cover

Having bought a bidet cover, you need to familiarize yourself with the installation instructions attached to it. Manufacturer's recommendations will have to be followed exactly.

First, turn off the water, remove the old cover, put a new one on the toilet and mount the mixer:

• connected to a flexible hose ½ inch;
• introducing the assembly into the hole provided on the housing;
• they fix the mixer using special studs and nuts, and laying rubber gaskets under the fasteners;
• they check the mixer so evenly installed and finally fix it using sealant.

It remains to connect the nanocover to the power supply. Do this by directly plugging it into a power outlet. The latter is installed behind the toilet so that it remains invisible. Posting is performed in cable channel.

An alternative to the multifunctional cover is a toilet with a bidet function. This is a plumbing fixture with integrated nozzles for supplying water. More information about such innovative models is written in this article.

Conclusions and useful video on the topic

What is it and how does a bidet cover work:

The sequence of installation of the bidet cover on the toilet:

By installing an innovative sanitary fixture, such as an electronic toilet lid, you can significantly improve the quality of personal hygiene procedures. When choosing a device, consider its features and dimensions of the existing toilet.

Have something to supplement, or have questions about the choice and installation of electronic covers on the toilet? You can leave comments on the publication and participate in discussions. The contact form is located in the lower block.