Rating of water filters for washing: rating of the best models and selection guide

The importance of water in human life is difficult to underestimate. It is needed daily in sufficient quantities. Not only the taste qualities of dishes, but also, to a large extent, people's health depend on its purity. To clean it, use different filters. And to determine which water filters for washing are better, you should familiarize yourself with them.

Varieties of water filters

In order to make the purchase of a water treatment device as efficient as possible, you need to focus on one of two possible filter designs:

• flowing;
• reverse osmotic.

The simplest to use, small-sized and affordable filters are flow-through filters. They consist of several containers that are connected in series by the manufacturer. There may be several such containers. Typically, two to five.

Each of them has a filter cartridge. The cleaning system is attached to the water supply using a rigid or flexible eyeliner. A structure is installed under the sink, and water flows through the faucet on the washbasin. Cleans such a filter exclusively cold water.

Flow Filter Features:

• purification of running water from large and small mechanical impurities;
• sorption purification - elimination of harmful bacteria, taste and odors;
• UV cleaning, if provided by the manufacturer.

As a result, it turns out that such a device purifies running water to the state of maximum safety for use. It can be used both with a centralized water supply system, and with autonomous (water from wells and wells).

Flow-type filters take up very little space under the sink.This system will fit perfectly in small kitchens, where there is very little space under the sink

The flow filter under the sink consists of the following elements (there may be differences, depending on the manufacturer):

• branch for water connection;
• tap for connecting a crane;
• filters - pre-treatment, mechanical and sorption, fine and finish;
• crane.

Filters with reverse osmosis for water purification, which are installed under the sink, more voluminous and expensive. This is due to the fact that two additional elements are provided in the design: storage tank and reverse osmosis membrane.

Such a membrane is designed to give consumers the most purified water. Thin polymer is rolled up. The pores of this material are so small that only water molecules can pass.

Naturally, the cleaning speed is much lower than that of flow filters, so it is advisable to use a tank to collect water.

Filters with storage capacity take up an order of magnitude more space than flow-through filters. This must be considered when purchasing and before installation.

Before the membrane are pre-filters, which remove all large impurities from the liquid. After the storage tank there is also a filter, the purpose of which is to eliminate odor, aftertaste. At the exit - almost perfect water.

Due to the fact that the liquid is also purified from various useful salts and minerals, some manufacturers can equip the device with mechanisms for saturating the purified water with the necessary chemical elements. This makes the design a little more expensive, but water is becoming healthier.

It is advisable that the tubes of the filter system are neatly laid and do not interfere. Otherwise, they can be damaged and the use of cold water will be impossible.

Top 11 best filters on the market

Both types of filters are not equivalent to each other and are designed for different categories of customers, so we selected the top ten models of flow and reverse osmosis systems and arranged them in increasing order of popularity.

Place No. 11 - Geyser 3VK Lux

Before buying such a device, it should be noted that its main purpose is to work with soft water. If the water is hard, it is highly desirable that it has a minimum iron content. Therefore, you need to buy either a water softener or a deferrizing filter to the system.

Characteristics:

• the number of cleaning steps - 3;
• type of treatment - sorption;
• chlorine removal - yes;
• productivity - 3 l / min;
• the presence of a crane in the kit is.

This is a fairly productive device. It is able to work even in systems with low pressure (from 0.5 atm).

Of the advantages, it should be noted the low cost of the filter and replaceable cartridges. This model is one of the most popular in the Geyser product line.

Place number 10 - Geyser Bio 322

This model of the flow filter can work with any water supply system. It copes well with loads and is able to provide a stable outlet pressure.

Suitable for those buyers who have water in houses is stiff and odors. Filter elements will save the liquid not only from mechanical impurities, but also from bacteria.

Characteristics:

• the number of cleaning steps - 3;
• type of cleaning - sorption, mechanical (deferrizes and softens water);
• chlorine removal - yes;
• productivity - 3 l / min;
• the presence of a crane in the kit - is.

Cartridges are durable. They need to be changed rarely. In systems where cast iron pipes are used, water is often saturated with excessive amounts of iron, but this drawback is eliminated with the installation of the Geyser Bio 322.

Disadvantages: significant cost of the filter itself and cartridges for it. Installation difficulties may also occur, as additional adapters are required for connection. We cannot but pay attention to the weight of the device - more than 6 kg.

Place number 9 - Geyser Allegro M

This reverse osmosis filter is popular with any category of consumers. He will find a place in new modern houses and old "Khrushchev". A good option for purifying centralized cold water.

Characteristics:

• the number of cleaning steps - 5;
• type of treatment - sorption (additionally softens water, mineralizes, deferrizes);
• chlorine removal - yes;
• productivity - 0.14 l / min;
• storage tank volume - 12 l;
• the presence of a crane in the kit - is.

The first three steps are used for preliminary water purification. At the fourth stage, only water and oxygen are filtered through a membrane with a pore size of 0.0001 μm. Next, the water enters the tank.

To prevent bacteria from multiplying in the tank, replaceable membranes are installed there, which retain the maximum number of microorganisms. Water in such a tank deteriorates 1000 times slower than in a tank without a membrane.

At the last stage, the water gets rid of odors and is saturated with minerals. In addition to this filter, you can buy a pump designed to increase the outlet pressure of water. Advantages: high service life; the design provides a pressure relief valve in the tank; high productivity of the cleaning system.

Disadvantages: high cost of construction; installation complexity.

Place No. 8 - New Water Praktic Osmos OU380

The device attracts with its price, small size and lightness. This is an excellent choice for small kitchens, where there is not enough space for volume reverse osmosis filters.

Characteristics:

• the number of cleaning steps - 5;
• type of cleaning - sorption (additionally softens water, deferrizes);
• chlorine removal - yes;
• productivity - 0,125 l / min;
• volume of storage capacity - 7.5 l;
• the presence of a crane in the kit - is.

The tank is small - this is the main drawback. At the same time, it quickly fills up. You can increase the speed at which water can be filled by buying a booster pump. Filling time will be reduced to 15 minutes. Thanks to a high-quality Japanese membrane, water purity is ensured at the level of expensive filters.

Among the shortcomings, the low quality of all components and the assembly as a whole is noted. But, the device confidently fulfills its warranty period.

Place No. 7 - Aquafor Favorite B150

The model is ideal for autonomous water supply systems. If it is planned to install in a centralized water supply system, it is necessary to use additional filters for mechanical cleaning. This is due to water pollution in the systems. You can do without it, though you will have to change cartridges more often.

Characteristics:

• the number of cleaning steps - 2;
• type of treatment - sorption;
• chlorine removal - yes;
• productivity - 2.5 l / min;
• the presence of a crane in the kit - is.

The filter is equipped with an additional stainless steel housing. This allows you to complete the appearance of the device.

The cartridge resource is quite large - 12,000 liters. Even for a large family, it will last a very long time. It’s easy to change a cartridge - it’s only one there. Replacements have to be done no more than twice a year. Advantages: clean water at the outlet, odorless chlorine; installation can be done independently; the pressure of purified water is enough for domestic needs.

Among the shortcomings, one can single out the high cost of replaceable cartridges. It is also recommended to install additional preliminary filters and water softeners. This will come out more expensive, but will provide an opportunity to maximize cartridge life.

Place No. 6 - New Water Expert M310

Well suited for hard water systems. The liquid goes through four stages of purification, where it eliminates odors and impurities. The manufacturer claims the ability of the filter to work at a pressure of 45 atm, which confirms the tests performed in the laboratory.

Characteristics:

• the number of cleaning steps - 4;
• type of treatment - sorption (additionally softens water);
• chlorine removal - yes;
• productivity - 2.5 l / min;
• the presence of a crane in the kit - is.

Of the advantages, the pleasant cost of the device and the thoughtful appearance stand out. Unfortunately, there were some drawbacks: the low cartridge life and the high cost of their purchase. The rest is an excellent budget option for apartments and houses.

Place No. 5 - Aquaphor Crystal Eco N

The filter combines qualities such as performance and a high degree of purification. A 0.1 micron membrane traps all contaminants in the water. At the same time, it passes the necessary amount of salts and minerals. The sorption component of the filter traps and eliminates bacteria.

Characteristics:

• the number of cleaning steps - 4;
• type of treatment - sorption;
• chlorine removal - yes;
• productivity - 2.5 l / min;
• the presence of a crane in the kit - is.

The cartridge resource is quite high - 8000 liters. A reliable crane is included. The weight of the device is only three kilograms. This model is well suited for those who have little space under the sink. Aquaphor Crystal Eco is a compact water filter that will be an ideal solution for autonomous water supply systems.

Place No. 4 - Aquaphor OSMO-Crystal 100

This is a worthy option for installation under the sink by the owners of residential premises. Having a low cost, the filter cleans even very contaminated water. It removes not only rust, but also heavy metals, pesticides and chlorine.

Characteristics:

• the number of cleaning steps - 4;
• type of cleaning - sorption (additionally softens water, deferrizes);
• chlorine removal - yes;
• productivity - 0.26 l / min;
• volume of storage capacity - 10 l;
• the presence of a crane in the kit - is.

Water from this filter can be used for bathing babies, preparing mixtures. Tank capacity is enough for cooking. This model is suitable for all lovers of clean water. Filters will have to be changed every 6 months, so the device can be classified as economical.

Place No. 3 - Atoll A-550m STD

A popular reverse osmosis treatment system that additionally mineralizes clean water at the 5th stage. The liquid purified in this way enters the container where it remains until it is consumed.

The storage capacity is enough for a supply of drinking water, cooking. As soon as water begins to be removed from the tank, the purification of new water begins automatically.

Characteristics:

• the number of cleaning steps - 5;
• type of treatment - sorption (additionally softens water, mineralizes, deferrizes);
• chlorine removal - yes;
• productivity - 0.08 l / min;
• storage tank volume - 12 l;
• the presence of a crane in the kit - is.

An important role is played by the mineralizer, which adds to the water the chemical elements that a person needs. Depending on the pressure in the system and the purity of the water, the storage tank will fill up for about 1-1.5 hours.

Among the shortcomings, the following points stand out: it is necessary to remember the timely replacement of filters - it is best to make a table with the replacement dates and place it on the device case; the price of cartridges is quite high; difficulty in installation.

Atoll A-550m STD is a suitable option for both apartments and private houses. With this device, clean water will always be available, rich in essential minerals.

Place number 2 - Geyser Prestige PM

The products of this manufacturer are really trusted, and the quality and unpretentiousness of the device, which has taken the fifth step of our rating, are also indicated by numerous reviews on various sites.

Characteristics:

• the number of cleaning steps - 5;
• type of treatment - sorption (additionally softens water, mineralizes, deferrizes);
• chlorine removal - yes;
• productivity - 0.14 l / min;
• storage tank volume - 12 l;
• the presence of a crane in the kit - is.

This appliance is ideal if the water clearly requires cleaning. A 5-step system will cope even with heavily polluted water. The model does not have any special flaws.You can focus on the fact that the system is quite bulky. The inconvenience is delivered by connecting tubes, the length of which the manufacturer made with a "margin".

It can work without a pump, but if the water supply system is weak pressure, then you should immediately purchase such an auxiliary device. This feature applies to all reverse osmosis filters. In installation, it is quite simple, as well as in replacing filter elements.

Place No. 1 - IKAR Water Treatment System

The best filter for water for washing is the ICAR filter. The highest degree of water purification in conjunction with the ICAR module, which ionizes the water, giving it negative redox potential (redox potential) and mineralizes it portionwise by the injection method.

This method of mineralization is superior in quality to all other mineralizers of purified water. That is, the water at the outlet is not only purified, but also alive. Features of living water were studied back in the 70s of our century and the most respected scientists around the world do not stop writing about its beneficial properties.

Water after the ICAR filter becomes a powerful antioxidant - it fights free radicals, stimulates the immune system and cleanses the body. It is good for everyone to drink such water. The SIC “IKAR” technologies have been awarded several prestigious international awards in Belgium and Switzerland. Water after the ICAR treatment system is recognized as water of the highest category.

Typical connection scheme for the Icarus filtration system

Characteristics:

• steps of water purification - 5;
• type of cleaning - reverse osmosis premium;
• purification from viruses and bacteria - yes;
• purification from chlorine and any other types of pollution - yes;
• passes only a water molecule through itself;
• resource - 1 000 000 l .;
• gives water a negative redox potential (ORP);
• storage tank volume - 10 l;
• the presence of a tap of clean water - is;
• It is delivered together with the mineral supplement "Severyanka +" No. 4 (contains Ca2 +, Mg2 + and iodine);
• the ability to connect a pH reactor to adjust the pH of the water.

Filters must be changed 1 time in 6-12 months, sold in any filter store. The IKAR system belongs to the category of economical ones - the prime cost of water of the highest quality, taking into account the cost of buying a filter - 2 p. per liter.

How to choose a suitable filter?

Since it is not easy to choose a modern water filter for washing, you have to listen to the proven recommendations of specialists and experienced users.

Before buying, you should pay attention to the following factors:

• consumed amount of clean water by the residents of the apartment / house;
• water quality;
• the presence of the right place under the sink.

These factors are important, because the choice of the desired model will depend on them. On average, one person consumes up to 3 liters of water, in its pure form and as part of food, drinks. Accordingly, you need to calculate the filter performance for the needs of the family.

Since only reverse osmosis options can boast of the best indicators of water purity, we should first consider them. If their productivity is not enough, then you need to dwell on flow models. It is reasonable to understaff them with softeners and deferrizing cartridges.

Pure water at any time is what installation of filters is necessary for. Modern replacement of filter elements will allow you to get safe water in your home

You also need to pay attention to the condition of the water that is supplied from the water supply. If it is characterized by excessive rigidity, then a filter with a water softening function is needed.

If the water supply system includes highways from old cast-iron pipes, then the incoming water will be with inclusions of large mechanical particles. Such water is not enough to clean from pollution, you still need to remove the excess amount of iron from its composition. Why should you opt for filters with deferrization.

If the water supply system in the house is autonomous and it already has a filter at the entrance to the house, for example, bottom or pre-treatment, then the simplest flow filters are suitable. We will only have to focus on the productivity of technology.

Subtleties of installation and operation

In order for the purchased filter to serve as long as possible, it is necessary to install it correctly. Companies selling such devices often offer free shipping and installation by specialized specialists. This is an important argument in favor of buying equipment in such companies.

If you have plumbing skills and tools, then you can do the installation yourself. An important step in the use of the filter is its preparation for work. So that when you first turn on there are no odors and turbidity, you need to let the water rinse the structural elements for the time specified in the instructions.

The filter installation process requires installation experience and certain plumbing tools. Therefore, it is better to entrust this to experienced professionals.

Also, do not forget about replacing cartridges and membranes - these are the main elements that help to get the most potable water.

Conclusions and useful video on the topic

This video will help you to correctly determine the main differences and advantages of flow and reverse osmosis filters:

The next video will focus on reverse osmosis systems. Here are the specific results of measurements of the main indicators of water:

In conclusion, it should be noted that both categories of filters allow you to get water of the required purity. For any water supply system, it will be possible to find the right equipment, regardless of budget.

The accuracy of the selection will be significantly affected by a preliminary analysis of tap water. This will make it possible to understand how hard the water is, which trace elements are in excess, and which minerals are in short supply.

Want to talk about which filter was chosen and installed in the water supply for the preparation of drinking water? Do you have useful information on a topic that may be useful to site visitors? Please write comments in the block under the text of the article, post a photo and ask questions.