The best surface pumps: we choose pumping equipment for home and country communications

Convenient in operation, reliable and efficient self-priming automatic pump is designed for pumping water, the temperature of which does not exceed + 35º. The second significant functionality is to increase the pressure in the water supply system. The model is suitable for outdoor use, resistant to weathering.

The pump is equipped with intelligent automation that starts and shuts down the unit as the owners need water. It can be configured to work in drip irrigation mode or to supply water to a washing machine. In the event of a decrease in the water level in the source, the automation will interrupt the cycle.

Specifications:

• The maximum. productivity - 3,5 m³ / h;
• The maximum. water withdrawal depth - 7 m;
• The maximum. head - 40 m;
• Power consumption - 800 W;
• The maximum. pressure - 4 bar;
• The pump mechanism is centrifugal;
• Protection - from overheating, from idling, i.e. dry run;
• Weight - 8.3 kg.

The GARDENA 3500 / 4E Classic model is bought by owners of small suburban plots with permanent houses and cottages. The pump is uncomplicated in operation, LEDs blink about malfunctions. When registering on the website of the official distributor, a warranty of 3 years 4 months is issued.

The machine attracts a self-priming pump with its performance and ability to create a head of 44 m. It perfectly pumps clean water from sources to a water supply system or to a storage tank. However, it cannot be used as a booster pump.

The implementation of the model in an autonomous water supply system allows you to automate its work. Starting and stopping the pumping will be carried out without the participation of the owners. The unit works perfectly in various modes: from the water supply to the drip irrigation circuits to the maintenance of washing machines, showers and dishwashers.

Specifications:

• The maximum. productivity - 3.8 m³ / h;
• The maximum. water withdrawal depth - 8 m;
• The maximum. head - 44 m;
• Power consumption - 1200 W;
• The maximum. pressure - 4 bar;
• The pump mechanism is centrifugal;
• Protection - against overheating of the IP44 motor;
• Weight - 7.5 kg.

The automatic pump Lavor EG-M 3800 is an excellent solution for the autonomous water supply of cottages and small suburban households. It is convenient in operation, easy to operate, and serves without repairs during the warranty period.

A practical, perfectly working pump without any problems pumps clean water from a depth of 8 m, filters out mineral inclusions larger than 3 mm. Designed for pumping water with the formation of a pressure of 45 m.

The model refers to the self-priming type: the position of the suction pipe above the axis of the engine. Suitable for organizing autonomous water supply. It can be used in aeration irrigation complexes and in pumping water from a storage tank to the consumer.

Specifications:

• The maximum. productivity - 4.6 m³ / h;
• The maximum. water withdrawal depth - 8 m;
• The maximum. head - 45 m;
• Power consumption - 1100 W;
• The maximum. pressure - 4 bar;
• The pump mechanism is centrifugal;
• Overheat protection;
• Weight - 7.9 kg.

Hammer NAC 1000A assembly buy for organization of autonomous water supply in small suburban areas. The model is distinguished by perfect assembly and trouble-free operation during and after the warranty period.

The powerful self-priming pump is easy to operate, easy to install and connect. The unit is designed to extract clean water from a depth of 9 m and deliver it to a height of 50 m. The depth of the intake is increased due to the built-in ejector.

On the basis of a JILEX Jumbo 70/50 P automatic pump, you can organize autonomous water supply for a small country house or cottage. The unit can be programmed to start and stop the water intake when the pressure in the system increases and decreases.

Specifications:

• The maximum. productivity - 4.2 m³ / h;
• The maximum. water withdrawal depth - 9 m;
• The maximum. head - 50 m;
• Power consumption - 1100 W;
• The maximum. pressure - 2 bar;
• The pump mechanism is centrifugal;
• Protection - against overheating of the IP54 motor;
• Weight - 10.2 kg.

The case of the model is made of reinforced plastic, due to which the developers significantly reduced the weight. The disadvantages of the unit quite reasonably include the lack of protection against “dry running”. This means that for the organization of the water supply system it will still be necessary to purchase an automation unit. The warranty is given for only 1 year.

A compact and practical pumping station will provide clean water to a small country house in which the owners live all year round, or a fairly spacious summer cottage. The complete set of the aggregate is a 24-liter hybrid tank. It will protect against water shocks and provide water in case of power outages.

Denzel PS1000X model will provide an opportunity to arrange autonomous water supply with automatic water withdrawal as needed. The operation of the pump and its stop are regulated and monitored pressure switch. The station can be used both in pumping clean water from a source, and in increasing the pressure in the water supply system.

Specifications:

• The maximum. productivity - 3,5 m³ / h;
• The maximum. water withdrawal depth - 8 m;
• The maximum. head - 44 m;
• Power consumption - 1000 W;
• The maximum. pressure - 4 bar;
• The pump mechanism is centrifugal;
• The volume of the hydraulic tank is 24 l;
• Protection - from overheating, from dry running;
• Weight - 13.5 kg.

The station is equipped with a multi-level protection system, eliminating engine damage due to operation in extreme conditions for it. Owners of the model note a bit more noisy work than sellers assure. The warranty period cannot be called sufficient - only 1 year.

Practical and economical pump station brand Vortex ASV-800/24 ​​series perfectly copes with the intake of water from a well or well. Will provide automatic supply to its consumer. The unit is suitable for increasing pressure in water supply systems transporting a medium with a temperature of no more than + 50ºС.

The model consists of an automatic pump and a hydraulic accumulator, which is needed to generate pressure in the autonomous water supply system, water supply in the event of a power outage and smoothing water hammer. The station is equipped with protection against idling, i.e. from dry running, and a system that prevents engine overheating.

Specifications:

• The maximum. productivity - 3.6 m³ / h;
• The maximum. water withdrawal depth - 9 m;
• The maximum. head - 40 m;
• Power consumption - 800 W;
• The maximum. pressure - 4 bar;
• The pump mechanism is centrifugal;
• The volume of the hydraulic tank is 24 l;
• Protection - from overheating, from dry running;
• Weight - 15 kg.

The unit pumps clean water with a low content of solid mineral inclusions. Impurities in the water to be transported can be no more than 150 gr. for 1000 liters The pump station will work flawlessly if the power surges in the power grid do not exceed ± 10%. Operation at -1ºС and below is unacceptable.

The pump station will fill the autonomous water supply system with clean water without any problems, will deliver it to the points of tapping in the automatic mode. The model pumps water not only from sources, but also from storage tanks. Can be configured for irrigation of a suburban area.

The unit is equipped with a condensing type induction motor, it is protected from overloads and overheating. A hydraulic tank will prevent the impact of water hammer on the equipment and create a supply of water in case of a power outage. However, a device that interrupts idling, i.e. with dry running, not included.

Specifications:

• The maximum. productivity - 3.3 m³ / h;
• The maximum. water withdrawal depth - 8 m;
• The maximum. head - 45 m;
• Power consumption - 900 W;
• The maximum. pressure - 4.5 bar;
• The pump mechanism is centrifugal;
• The volume of the hydraulic tank is 24 l;
• Protection - against engine overheating;
• Weight - 16.2 kg.

In the event of a reduction in the water supply path and the pumping depth, the Metabo HWW 3300/25 G model will be able to simultaneously service two water outlets in the house or two sprinklers. The body is made of steel, the motor is made of cast iron. Weight significantly complicates the movement of equipment, but allows you to resist atmospheric negativity. The warranty is valid for 3 years.

The station with an average productivity is chosen by the owners of low-rise private houses and summer cottages. It is used in the construction of a fail-safe system of automatic water supply to consumption points. The model is suitable for organizing an irrigation system for a site and for increasing pressure in a water supply system.

The unit is a comprehensive device, including an automatic pump and a hydraulic accumulator with a capacity of 18 liters. It forms a supply of water, which will help to wait for the period of power outage, and will smooth out the impact of water hammer. The activation and interruption of the pump down is controlled by a pressure switch.

Specifications:

• The maximum. productivity - 3.0 m³ / h;
• The maximum. water withdrawal depth - 9 m;
• The maximum. head - 28 m;
• Power consumption - 500 W;
• The maximum. pressure - 2 bar;
• The pump mechanism is centrifugal;
• The volume of the hydraulic tank is 18 l;
• Protection - against engine overheating;
• Weight - 15.1 kg.

The model’s built-in filter allows you to hold mineral particles up to 0.8 mm in size. For intake of water from an open source or an old well, it is recommended that the suction pipe be equipped with a bottom filter. The manufacturer provides a guarantee of only one year of operation of the unit.

The silently working circulation pulser attracts with an economical energy consumption, compact dimensions and simplicity of installation. The model can be used to stimulate the movement of coolant in closed heating circuits. It is also suitable for lines that supply heated sanitary water to faucets.

The pump is equipped with a wet rotor, designed for pumping through closed branches of clean water. The working medium must not be viscous and contaminated with mineral particles larger than 1 mm. Favorable for him working temperature + 20ºС.

Specifications:

• The maximum. head - 8 m;
• Power consumption - 135 W;
• Throughput - 11 m³ / h;
• The maximum temperature of the medium is at least -25 ° C / maximum + 110 ° C;
• Installation options: horizontal and vertical;
• Protection - against engine overheating;
• Noise - 43 dB;
• Weight - 4.8 kg.

Grundfos UPS 32-80 180 circulation pulser - a programmable device. You can activate its work with a timer delay and program switching on and off in accordance with the indications of the thermostat set for heating. Warranty obligations from the manufacturer are valid for 2 years.

The quiet and economic circulation pulser without problems can work continuously for a long period. The model is designed to stimulate the flow of water as a coolant or its mixture with propylene glycol in 1: 1 proportions. It should be noted that when using viscous antifreezes, the performance of the device decreases.

The pump has all the advantages of a wet rotor device. Bearings immersed in the pumped medium are constantly lubricated by it, which reduces the load on the friction parts and increases the life of the unit. In the manufacture of the housing and working components, wear-resistant materials were used.

Specifications:

• The maximum. head - 4 m;
• Power consumption - 25 W;
• Throughput - 2.9 m³ / h;
• Maximum temperature of the medium - minimum + 2 ° C / maximum + 95 ° C;
• Installation Options: horizontal;
• Overheat protection;
• Noise - less than 43 dB;
• Weight - 2.57 kg.

The Grundfos circulation pump from the ALPHA1 L 25-40 180 series works perfectly in all types of radiator systems and in warm floors. At the disposal of its owners 7 different modes.

The pump can be used in hot water supply systems to the consumer and in the water supply circuits that require increasing or maintaining pressure. Activation can be made from a PWM signal.

A single-stage pump will increase, stabilize and maintain pressure in forced heating systems. It works perfectly in domestic water supply circuits.It can be installed both before and after the water heater.

The device is equipped with a pressure switch, a flow controller and a pressure tank, thanks to which the device can operate in automatic mode. Wilo PB 201EA is suitable for pumping high temperature media. The design has an overheat protection system.

Specifications:

• The maximum. head - 15 m;
• Power consumption - 340 W;
• Throughput - 3.9 m³ / h;
• Maximum temperature of the medium - minimum + 5 ° C / maximum + 80 ° C;
• Installation Options: horizontal;
• Overheat protection;
• Noise - less than 55 dB;
• Weight - 7.5 kg.

The circulation pulser of the PB 201EA series is suitable only for work with clear water. It is unacceptable that the transported medium contain organic and mineral impurities. If available, a filter must be placed in front of the pump.

Installation and connection of the model can only be done by experienced electricians whose qualifications correspond to the category of work being carried out.

The pump from the company Dzhileks of the Circular 25/80 280 series is intended for ensuring stable movement of the heat carrier in household heating circuits. Suitable for arranging radiator heating systems, underfloor heating, climate systems such as chiller-fan coil. It cannot be used in systems supplying drinking water.

The model can work in three different modes. The engine of the device is protected from overheating and overloads that threaten it. Finding a “wet” rotor in the pumped medium constantly lubricates and cools the friction parts, which significantly extends the life of the device, eliminates and prevents breakdowns during operation.

Specifications:

• The maximum. head - 8 m;
• Power consumption - 135 W;
• Throughput - 12 m³ / h;
• Maximum temperature of the medium - minimum + 10 ° C / maximum + 110 ° C;
• Installation options: horizontal and vertical;
• Overheat protection;
• Noise - less than 65 dB;
• Weight - 5.5 kg.

The circulation pump is made of wear-resistant materials that have undergone anti-corrosion treatment or are coated with an anti-corrosion protective sheath. The manufacturer’s warranty is valid for one year only.

SANIVITE sewer from the manufacturer SFA is designed to drain dirty water with a small inclusion of organic matter and mineral particles. Connect to it kitchen and sanitary sinks, shower boxes, bathtubs, bidets, washing machines and dishwashers. For receiving drains from the toilet, the model is not suitable.

Among the attractive installation qualities, the first places are occupied by practicality, small size and ease of installation. It does not constantly discharge sewage into the sewer, but as it is being filled. Maintenance is extremely simple: to flush, clean, replace parts, just remove the cover.

Specifications:

• The maximum. head - 5 m;
• Power consumption - 400 W;
• Throughput - 6 m³ / h;
• Maximum temperature of the medium - maximum + 60 ° C;
• Installation Options: horizontal;
• Protection - against dry running;
• Noise - less than 42 dB;
• The number of available inputs is 4 pieces, 3 of which are lateral, connected to the main pipe through eccentric devices.

The unit is able to pump out drains from plumbing and household appliances, horizontally removed from it at a distance of 50 m, vertically - up to 5 m.This model is popular among summer residents, owners of small country houses and offices / shops organized in basements and basements.

The Sololift 2 CWC-3 installation is designed to accelerate and stimulate the flow of dirty water and sewage into the sewer. It is connected to household appliances that consume tap water, and to plumbing devices: bathtub, sinks, shower, bidet, toilet bowl. Before being discharged into the sewers, organic matter and toilet paper are crushed.

The device allows you to automate the process of discharging effluents into the sewer, if their natural movement is difficult or impossible for technical reasons. It is necessary if the output to the centralized system is higher than the sanitary equipment serviced by the station.

Specifications:

• The maximum. head - 8.5 m;
• Power consumption - 620 W;
• Throughput - 8.22 m³ / h;
• The maximum temperature of the medium is a maximum of + 50 ° C;
• Installation Options: horizontal;
• Overheat protection;
• Noise - less than 42 dB;
• The number of available inputs is 4 pieces, 3 of which are lateral, connected to the main pipe through eccentric devices.

The model is equipped with a cutting nozzle that processes small organic impurities before being discharged into the sewer. The motor is equipped with a protection system that excludes the possibility of overheating and failure of the winding.

The design has a carbon filter that eliminates negative sewer odors, and a check valve that prevents the return of effluents to the device.

Practical unit for bathrooms and kitchens in the basement and basement

Quiet sewer installation is used mainly in the arrangement of residential facilities. It is installed in apartments and hotel rooms, organized in the basement level. The model finds application in a summer house if technical circumstances interfere with the natural movement of gray effluents into a septic tank.

The SUVERAIN 30-FFA-A station connects the releases of sinks, showers, bidets, bathtubs. It serves washing and dishwashers, cope with water containing grease and dirt without problems. This installation is not suitable for connecting to the toilet.

Specifications:

• The maximum. head - 4.0 m;
• Power consumption - 400 W;
• Throughput - 6.0 m³ / h;
• The maximum temperature of the medium is a maximum of + 35 ° C;
• Installation Options: horizontal;
• Overheat protection;
• Noise - less than 42 dB;
• The number of available inputs is 3 pieces.

The sewer installation engine is protected from overheating, which significantly prolongs its working life. The model is equipped with a non-return valve to prevent the reverse movement of effluents, an ejector that ensures pumping and successful drainage. The equipment does not require specific maintenance.

The sanitary installation JEMIX STP-250 is designed to stimulate the discharge of dirty water into the sewer system. It is used if technically free movement of drains towards unloading is impossible. Household equipment that uses tap water and plumbing with the exception of the toilet are connected to it.

The compact dimensions of the model allow you to arrange it so that the equipment and communications connected to it do not take up too much space from the owners. If you can’t install it directly next to the plumbing, washing machine or dishwasher, the model can be moved to any place convenient for connection, operation and maintenance.

Specifications:

• The maximum. head - 5.0 m;
• Power consumption - 250 W;
• Throughput - 4.8 m³ / h;
• The maximum temperature of the medium is a maximum of + 50 ° C;
• Installation Options: horizontal;
• Overheat protection;
• Noise - less than 42 dB;
• The number of available inputs is 2 pieces.

To protect the engine from overheating, there is an integrated system that responds to exceeding the operating temperature limit. The unit is equipped with a check valve to prevent the reverse movement of dirty water. The discharge of sewage into the sewer outlet is carried out automatically as it is filled.