How to fix low pressure error in PMM Hotpoint-Ariston?
1
answer81
viewGood afternoon, help determine the cause of the breakdown of the Ariston Hotpoint dishwasher with 4 operating modes. The display shows error indication 2 and 3.
When you turn on, it drains immediately, then draws water, then 4 beeps, then it drains again and error 2 and 3 occur. Please advise how to fix the breakdown?
Visitors Comments
Add a comment
How much does it cost to connect gas to a private house: the price of organizing gas supply 
The best washing machines with dryer: model rating and customer tips 
What is the color temperature of light and the nuances of choosing the temperature of the lamps to suit your needs 
Replacement of a geyser in an apartment: replacement paperwork + basic norms and requirements
Hello. At Hotpoint Ariston, the simultaneous flashing of 2 and 3 LEDs means that for a fixed time the tank of the dishwasher was not full. Possible reasons:
1. Weak pressure (check the pressure of the water supply, correct the situation or contact the Criminal Code if you live in an apartment).
2. The inlet hose popped out of the hole, leaking or pinched in it (you can fix it yourself too).
3. The input filter is clogged. How to clean it should be in the instructions for your device. If you lost, search by model on the Internet or ask us, we will find it for you.
4. The drain is connected with violations (if the machine has not been used before).
5. Problem with blockage or malfunction of the inlet solenoid valve (clean and / or replace).
6. Pressostat malfunction - clean or replace, depending on the cause.
Also note that you can find other errors of this PMM and their solutions here or call the Hotpoint Ariston service center at 8-800-333-3887 (open daily except Sunday).