Which pumping station to choose for lifting water by 3.5 meters?
Good afternoon! Tell me the technical part. I'm interested in a pumping station with a hydraulic accumulator. She has a maximum suction lift of 8 meters.
At my facility, a pump is required to raise water from the tank to a height of 3.5 meters, the tank itself is 90 meters from the input. Diameter of the pipeline - DN: 50. The maximum consumer expenses are: 1.68 m3/ day; 0.51 m3/ h; 0.37 l / s. What do you think, the pump station will cope with this task? Thank.
Visitors Comments
Add a comment
Good afternoon, Christina.
Nothing is clear from your question. What do you need - a pump station with a hydraulic accumulator or a pump for raising water to a height of 3.5 meters from an existing tank? In simple terms, a pumping station with a hydraulic accumulator is a tank + pump. Water enters the tank, and the pump increases the pressure to the necessary.
What kind of water supply? Central, well or well?
If I understand you correctly, the tank is located at a distance of 90 meters from the planned installation site of the station. The task of the station is to provide stable water supply to a two-story house.
1. In the case of central water supply, it is sufficient to install a pumping station with a hydraulic accumulator. With the indicated maximum consumption it is necessary to take a station with a capacity of 800 - 850 watts. It is advisable to provide additional capacity with a large volume of 50-100 liters. TOP 10 stations currently on the market are available at this article.
2. It is very costly to arrange water supply from the well at a distance of 90 meters from the house. The maximum horizontal distance for the pump to work from the well, well - 32 meters. If this is true, it is advisable to drill a well in the area.
Additionally, I recommend that you familiarize yourself with this and this articles.
Contact your local engineering network specialists, according to the specifications you will be offered the best option.