Stinks of gas from the stove: the causes of the smell of gas from the oven and from the burners and tips for eliminating them

The simplicity and ease of use of gas furnaces was appreciated by many users. Thanks to the stove, it’s easy to cook the most difficult dish. But sometimes users notice that during operation it stinks of gas from the stove - the smell can be felt during operation of the burners, oven or after turning off the device. But what is its appearance connected with and evidence of what it is?

In this article, we will look at why gas leaks occur, and talk about how to troubleshoot on your own. We will provide the presented material with visual photos and thematic videos.

Features of the operation of the gas stove

Professionals know that the gas that is supplied in centralized lines is odorless. An unpleasant aroma is given to him with the help of odorant ethyl mercaptan. This is done for security purposes, as it allows any user in a timely manner detect leak, and, as a result, avoid poisoning or explosion.

At the moment when gas is ignited in a burner or oven, a small part of the fuel can enter the room, creating a feeling of leakage. However, this situation is safe, and the smell quickly disappears.

If the unpleasant aroma is constantly felt during cooking, you should think about the likelihood of depressurization of the system, the need for repairs.

It is worthwhile to engage in an independent search for gas leaks, restore the system’s working capacity only if you have specialized knowledge and experience in servicing gas appliances

Sometimes users do not understand why when a burner or oven burns and at the same time it smells of gas.

In this case, the cause of the leak may be:

• loosening the attachment of the connecting hoses;
• the presence of deformation, cracks in the gaskets;
• the appearance of holes in hose in the process of prolonged use;
• loosening the gas tap;
• drying of the lubricant;
• wrong plate mounting.

Before raising the alarm, it is worthwhile to figure out whether the gas really smells. For example, manufacturers treat the burners with a special composition, so when you use a new gas stove, you often feel an unpleasant odor. It appears when grease burns out. After a couple of weeks of operation, the smell disappears without outside interference.

Sometimes the cause of unpleasant aromas that appear during the operation of the gas stove is the carelessness of the installers. They leave pieces of paper, rags, plastic in the interior of the device. Under the influence of high temperature, the material gradually burns out, exuding an uncharacteristic aroma.

In accordance with the contract, gas service employees are obliged to check the serviceability of equipment at least once a year

When the oven constantly smells of gas, an unpleasant smell is felt when the burners are turned on, it is worth contacting specialists, call the gas service. If you want to fix the problem yourself, you must immediately begin to search for a leak.

Self-diagnosis of faults

To figure out if the gas smells from the oven or from the stove, you need to determine where the leak occurred.

Having decided where there is a gap, it will be easier to describe the malfunction when calling a specialist. This will help the master to take the necessary parts for repair.

If there is an unpleasant odor in the room, it is important to deal with the nature of the malfunction:

• gas enters the room even when the stove is not working;
• an unpleasant odor appears after turning on the device;
• gas oozing from off burners when the neighboring ones work;
• unpleasant aroma appears only during the ignition of the stove.

Most of the defects are eliminated by replacing a hose that has lost its tightness, a worn gasket, and failed parts. However, it is better to entrust the work to restore the performance of the stove professionals.

There are several ways to determine the cause of a gas stove malfunction. In the process of diagnosis, it is important to comply with safety regulations, not to let children to a faulty device

When it is detected that the gas panel is leaking gas during operation, it is important to quickly locate the leak.

You can independently determine it in several ways:

1. Aurally - in the place of depressurization, a characteristic whistle appears.
2. By smell - unpleasant odors intensify as you approach the leak.
3. ATorally - to determine the place from which the gas comes out, use soap suds. To do this, soap is diluted with warm water. Thick foam is applied to the joints of hoses, pipes, taps, threaded connections. When you turn on the appliance, soap bubbles will appear in the leak.
4. With the help of specialized sensors. Compact devices analyze the composition of air. With serious deviations, they emit a sound, light signal, and some models equipped with shutoff valve, block the flow of gas.

When the presence of a gas leak is confirmed, and its place is detected, it is important to ventilate the room well, to report a malfunction to the gas service.

You cannot look for a gas leak using a lighter. If gas has accumulated inside the stove, such actions may cause an accident.

While you expect gas service specialists, it is not recommended to use electrical appliances, turn them on / off.

Gas stove troubleshooting

Before starting repairs, it is important to know that all gas fittings are made of their alloys that do not give sparks when touched. In the process of restoration work, it is worth using similar materials.

Of the tools, pliers, an adjustable wrench for the stove and valve, and a gas wrench will be needed.

Problem # 1 - burner malfunctions

When the smell of gas appeared as a result extinguished flame, immediately close the valve, ventilate the room.This situation is considered an emergency, so you need to immediately open the windows wide open. When the burner cools down, it is important to thoroughly blow it, clean from the remnants of food, fat.

During the operation of the stove on the burner deposits accumulate, capable of giving flame yellow tint. This can be misleading, create the appearance of a malfunction where it does not exist.

A working burner ensures an even blue flame. If tongues of yellow, red color slip through, this indicates a burner malfunction, a probability of fuel leakage

After thorough cleaning of the burner, it is necessary to install it in place, light it, check the operation

If any defect is caused by a defect, replace the burner with a new one.

Problem # 2 - breakage of the connecting hose

The hoses used to connect the gas are sold at specialized points of sale. Visually, they differ from the rest with a bright yellow shell.

Gas supply hose, connecting elements, are distinguished by a bright yellow braid. This allows you to highlight the elements suitable for creating a gas pipeline from other similar products.

When a crack in the hose becomes the cause of the leak, it’s worth replace it. After all, the repair will provide a short-term effect and an unpleasant smell will appear again very quickly.

Problem # 3 - Leakage in the area of ​​the stopcock

To check the operation of the unit, it is necessary to apply a soap solution to the nozzle. If a leak is detected, immediately shut off the gas supply, call a professional. In the presence of a new valve, linen tow, the master promptly will replace the gas cock.

At the end of installation, the connection is tightened until the valve is in the desired position. Correct installation is determined by re-applying a soap solution.

The stopcock is located on a pipe connected to the central line. Also, the problem may be in the valve at the place of connection of the stove to the cylinder. If the connection is not tight, a gas leak may appear here.

To extend the life of the compound, it is stained with oil paint. After the composition dries, a dense film is created that can reduce the likelihood of leakage.

Conclusions and useful video on the topic

You can get detailed instructions for detecting gas leaks by watching the video.

Summing up, it is worth noting that the cause of an unpleasant odor that appears during the use of a gas stove may be the lubricant applied by the manufacturer, or the leak of blue fuel.

If the composition deposited on the nodes of the new equipment burns out over time, then the gas entering the room can cause poisoning or an accident.

At the first sign of a malfunction, it is worth contacting professionals. Solving problems yourself is only necessary if you have specialized knowledge, experience working with gas equipment.

Have you encountered a gas leak and want to talk about your experience finding and fixing problems with other users? Share your experience with our readers, leave your comments in the block below, ask questions to our experts and participate in the discussion.