Voltage stabilizers for a gas boiler Baxi: TOP-12 of the best models according to consumers

The device is released under the brand name of a reliable Russian manufacturer Bastion. Designed to work with indoor installations wall mounted gas boilerswhose power consumption does not exceed 222 VA. Withstands short-term overload up to 222 VA. It operates around the clock.

The relay type device is controlled by a microprocessor; during operation, it does not introduce distortions. The work units are enclosed in a sturdy white plastic case. Cooling occurs naturally, for this a lot of ventilation holes have been made in the walls of the case.

When an emergency occurs, it emits a light signal and produces a protective auto power off.

Specifications:

• phasing - single-phase;
• input voltage - 165-260 V;
• output voltage - 200-240 V;
• power - 222 V · A;
• accuracy - 9%;
• type of cooling - natural;
• dimensions (w / h / d) - 104/135/104 mm;
• weight - 1.5 kg.

Installation of the device is simple: it can be placed on the floor near the boiler or fixed on the wall in a convenient position with DIN-rails located on the rear panel of the stabilizer. Fasteners supplied. Recommended for use with gas boilers and other electrical equipment in private homes, apartments, offices.

The stabilizer is manufactured under the Finnish brand, the products of which are reliable and have a long service life. Designed to equalize the voltage of home appliances, including gas boilers. Protected against overload and short circuit in the network. If operating parameters are violated, the load is de-energized.

The relay type device has microprocessor control. The automatic fuse for maximum protection is combined with a switch. Equipped with an integrated surge protector for 2 CEE7 / 4 sockets.

The case is non-marking, black, made of plastic. Connection to the mains is carried out using a half-meter cable and a plug of CEE7 / 7 standard. Indication on the top panel helps to control the operation of the device - LEDs “network”, “overload”, “stabilization”. There is also a shutdown button.

Specifications:

• phasing - single-phase;
• input voltage - 184-285 V;
• output voltage - 198-253 V;
• power - 200 V · A;
• accuracy - 14%;
• type of cooling - natural;
• dimensions (w / h / d) - 106/118/112 mm;
• weight - 1.4 kg.

This is a floor type device, that is, it can be installed on a horizontal surface (floor, shelf, specially prepared base). Recommended for use in cottages connected to the gas main. In addition to the boiler, another device can be connected to it, but within the specified working limits.

An automatic regulator with a reliable built-in filter is designed to protect home electrical devices from unstable mains voltage. It has built-in autotransformer protection from maximum temperature spikes and overloads. Like all equipment Defenderis made in China, but has good reviews and recommendations.

Shutdown at critical parameters is triggered by an automatic fireproof fuse. The plastic black casing resembles a grill - numerous openings are necessary for the natural ventilation of working elements.

On the top panel there are two sockets with grounding, a shutdown button and an indication: “network”, “protection”, “stabilization”.

Specifications:

• phasing - single-phase;
• input voltage - 175-285 V;
• output voltage - 198-242 V;
• power - 200 V · A;
• accuracy - 10%;
• type of cooling - natural;
• dimensions (w / h / d) - 115/110/140 mm;
• weight - 1.17 kg.

The device is small and, in comparison with analogues, light. It is installed on the floor next to connected appliances or an outlet. It is used as a summer residence option, suitable for servicing gas boilers of small capacity. It is allowed to connect two electrical appliances.

Invertor series stabilizerInstab"Is designed for any home appliances, including gas equipment of medium power, sensitive to power surges. Available in three versions, which differ in output voltage: 220/230/240 V. Electronic elements are protected from overheating, overload, impulse noise, short circuit.

The structure is mounted on a wall and connected via a 1.3 m power cord with a 3-pole plug. A socket is located on the front panel for connecting to the boiler. Here is an indication that allows you to control the operation of the equipment.

The cooling method is convection, without a fan, so the device works quietly. The device has a 2-year warranty and European CE certification.

Specifications:

• phasing - single-phase;
• input voltage - 90-310 V;
• output voltage - 216-224 V;
• power - 350 V · A;
• accuracy - 2%;
• type of cooling - natural;
• dimensions (w / h / d) - 155/245/85 mm;
• weight - 2 kg.

The compact, flat-shaped device is easy to install on the wall, the kit includes a mounting bracket, wall plug and screw. The power button is located on the side. The stabilizer is recommended for operation in cottages, in dachas, in office premises. It works at a humidity of 90% (non-condensing).

The relay type stabilizer is manufactured under the Italian brand in China. It serves to maintain a stable, without surges, voltage in automatic mode. Provides safe power for electrical household appliances and units, including hot water and gas heating boilers. Functions are regulated by the microprocessor.

Like all similar devices, it is protected against short circuit and overheating. In case of an accident occurs auto power off. If the maximum voltage limit in the mains is exceeded, the device also turns off with a 6-second delay mode.

The electronics is enclosed in a black plastic rectangular case with ventilation holes. On the front panel there is an indication, including digital, as well as an input / output display switch. On the side there is a fixed cord, a power button and one socket with grounding.

Specifications:

• phasing - single-phase;
• input voltage - 140-270 V;
• output voltage - 202-238 V;
• power - 500 V · A;
• accuracy - 8%;
• type of cooling - natural;
• dimensions (w / h / d) - 330/160/60 mm;
• weight - 2.4 kg.

The device is designed for wall mounting, which can be done independently. Recommended for the protection of household appliances, compressors, ventilation systems, alluvial stations, lighting and air conditioning. Well established in work with wall and floor gas boilers in country houses, in conditions with unstable mains voltage.

The manufacturer of the equipment is registered in Hong Kong; it launches low-cost but high-quality products on the market. The stabilizer corrects the voltage in the network, protecting household appliances from breakdowns and blackouts. Adjusts the voltage drop or increase if the power supply parameters do not correspond to the working ones.

Installed internal protection against network interference, short circuit and high loads. The device is protected from overheating by natural ventilation, which is possible due to openings in the housing.

The body of the stabilizer is made of reliable plastic in black, has a cube shape. The power button, LED indication and two sockets are located on the top panel, the power cord goes sideways.

Specifications:

• phasing - single-phase;
• input voltage - 150-260 V;
• output voltage - 198-242 V;
• power - 500 V · A;
• accuracy - 10%;
• type of cooling - natural;
• dimensions (w / h / d) - 123/120/123 mm;
• weight - 2 kg.

The appliance is installed on the floor, table or shelf, next to a power outlet or connected household appliances. The stabilizer 100% copes with the functions, working in tandem with a gas boiler, therefore it is recommended to owners of suburban gasified houses. Serves either one unit of medium power, or two low-power household devices.

Stabilizer inverter type from the series "Instab", Repeating the IS350 Calm model in technical specifications, but with a maximum power of 550 watts. Designed for sensitive electronic equipment, including programmable gas boilers Baxi. The manufacturer produces three popular options with different output voltage parameters: 220/230/240 V.

The device provides emergency protection against interference, short circuit, overload, excessive heating. The case has a flat shape - for easy mounting on the wall. LED indicators and a ground outlet for easy operation are located on the front panel, the power button is on the side. The power cord is also fixed to the side, its length is 1.3 m.

Cooling is carried out by convection, without a fan, which guarantees almost silent operation. In addition to excellent technical characteristics, it looks attractive and the warranty period is 2 years.

Specifications:

• phasing - single-phase;
• input voltage - 90-310 V;
• output voltage - 216-224 V;
• power - 550 V · A;
• accuracy - 2%;
• type of cooling - natural;
• dimensions (w / h / d) - 155/245/85 mm;
• weight - 2 kg.

The device is easily installed on the wall with your own hands, using the supplied bracket, dowel and screw. Invertor the model is recommended for use with gas boilers in cottages, in summer cottages. It is able to work in damp rooms, degree of protection - IP20.

Model 500/1-EM - the youngest in the line ACH stabilizers of the Latvian manufacturer Resanta. A suitable option for connecting one powerful unit - a gas boiler or two less powerful devices, for example, a TV with a receiver. Reliable and strong, has a set of excellent characteristics, fully pays for its value.

Thanks to a well-thought-out electromechanical design, the efficiency of the device reaches 97%, and the stabilization error is only 2%. More suitable for networks with long ups or downs, without sharp and regular surges.Overloads in the network activate the stabilizer protection, which puts it in a safe mode of operation.

The metal black case has a rectangular shape. For convenience of transportation, a handle is fixed on top, and legs are provided for stability from below. On the front surface there is a voltmeter display, a power button, and an indication.

Specifications:

• phasing - single-phase;
• input voltage - 140-260 V;
• output voltage - 216-224 V;
• power - 500 V · A;
• accuracy - 2%;
• type of cooling - natural;
• dimensions (w / h / d) - 190/170/125 mm;
• 4 kg

The stabilizer is installed on the floor. If you plan to put it on a shelf, then you need to consider the weight. It is recommended for use with all types of household electronic devices. Suitable for surge protection of the gas boiler supply line Baxi.

The homeland of the brand and the country of production of stabilizers is Russia. The Kotel series is designed specifically for gas heating equipment. It is suitable for single and bypass models, wall and floor. Relay devices operate around the clock, without interruptions and stops throughout the life of the device.

Before launching into mass production, the devices were tested by companies Ariston and Baxi, after which they earned positive recommendations from popular manufacturers of household appliances. Efficiency of devices - not less than 97%.

The stabilizer is protected by high-speed electronics, it is not afraid of frequent power surges. Convection cooling prevents overheating. The body is made of metal and coated with moisture resistant paint. On the front panel there is an electronic display, power and adjustment buttons, an outlet on the side.

Specifications:

• phasing - single-phase;
• input voltage - 130-265 V;
• output voltage - 202-238 V;
• power - 400 V · A;
• accuracy - 8%;
• type of cooling - natural;
• dimensions (w / h / d) - 135/203/93 mm;
• weight - 2.2 kg.

Wall installation is carried out using the mounting kit that is included in the kit. The installation area is near the appliance or the power outlet. It is recommended to use the model for the protection of boiler equipment and lighting systems, test laboratory installations, water supply and security systems.

The uninterruptible power supply is designed to protect household electronic equipment and heating equipment from any interference and malfunction characteristic of the power supply network. The main advantage of the device is the combination energy saving the functions Green Mode and automatic regulator.

The device is equipped with 4 sockets of the EC320 C13 standard, for the telephone network there is an RJ-11 port. After a power outage uninterrupted supports the operation of electrical appliances for 12 minutes. A battery with a capacity of 7 Ah is charged up to 90% in 6-8 hours.

Specifications:

• power connectors - 4;
• output power - 650 V · A / 390 W;
• voltage is single-phase;
• indication - is;
• charging - 8 hours;
• dimensions (w / h / d) - 98/170/305 mm;
• weight - 4.8 kg.

The power source is installed on the floor near the outlet or the closest electrical appliance to the outlet. No additional maintenance required. Suitable for heating boilers of various brands.

Series Back Basic popular brand Ipon Designed for mass use in order to protect computer and other electronic equipment, including programmable heating devices. The device protects against all kinds of malfunctions in the power supply network: power surges, noise, high-voltage emissions, emergency shutdown.

Allows you to connect up to 3 devices, but it swings low-power devices. Features include function Green Powerthat fires and disables Ups in automatic mode at low load during battery operation.

It runs on battery for about 20 minutes if the load does not exceed 100 watts. Efficiency - 95%.

Specifications:

• power connectors - 2;
• output power - 850 V · A / 480 W;
• voltage is single-phase;
• indication - is;
• charging - 8 hours;
• dimensions (w / h / d) - 100/143/278 mm;
• weight - 5.15 kg.

Installation method - floor. A heavy appliance can also be put on a shelf if it is carried securely.

The device belongs to the series Professional Rackmount and it is recommended for professional use, that is, for installation in a server, if applied with computer equipment. Suitable for ensuring the safety of heating equipment: protects against any problems arising in the electrical network.

The LCD screen displays the maximum information about the operation of the device: the current operation, the state of the load, power and batteries, errors. The battery switches over within 4 ms. It runs on battery 1 minute at full load and 7 minutes at half.

Specifications:

• power connectors - 8;
• output power - 1000 V · A / 600 W;
• voltage is single-phase;
• indication - is, the LCD screen;
• charging - 8 hours;
• dimensions (w / h / d) - 166/118/288 mm;
• weight - 6.5 kg.

The heavy appliance is installed on the floor near the outlet. In addition to the boiler, other related equipment can be connected to it - for example, a pump.