Wall-hung toilet with installation: selection rules, pros and cons of such a solution + installation steps

Engineering features of plumbing devices are usually associated with saving space in a limited space of a bathroom or toilet. Compact equipment is always preferable, preserving its functions and ease of use as much as possible.

For example, a hanging toilet with installation completely frees the floor, as it is attached to the wall structure. Thanks to this, space expands not only visually, but also in the literal sense of the word. We will find out whether the suspension model is so good and what conditions must be observed for its installation.

Features of the suspended type of toilet

There are many opinions about mounted models: to some users they seem uncomfortable and unreliable, while others consider them to be the only acceptable. To find out the truth, we recall how the wall-hung toilet favorably differs from the floor counterparts, and what are its weak points.

Design Features

Just distinguish two modifications of the toilet, if we talk about the installation method. The first category is traditional floor products, the second is suspended, mounted on a fixed structure.

A metal frame fixed by anchors on the wall and floor is called installation. A toilet bowl is attached to it.

Thus, all the auxiliary elements, including the drain tank, are located behind the false wall, and only the bowl with the seat remains visible.

Unlike the floor model, which consists of two structural elements - the toilet bowl itself and the adjacent cistern, the mounted version has more components:

• installationmasked by a partition;
• bowl with a set of mounts;
• flat tankalso walled up in the wall;
• button, regulating discharge and located in a convenient place.

All elements have features that are explained by the installation method:

Conveniently, there is a choice when buying a particular model. You can purchase a toilet in the kit, along with the installation.

But large companies often implement another scheme: they sell bowls and frames separately. So it turns out more decisions, it is easier to choose the height of the seat, to determine the design of the bowl.

The metal frame is usually equipped with various elements for installation: nozzles for water inlet and drainage, fasteners, gaskets, adapters

Universality of products is achieved by uniformity of sizes: the same diameter of the nozzles and holes, the distance between the studs. If after some time you want changes and there is a desire to change the toilet bowl, then the old, already installed installation will do.

Pros and cons of installation modifications

Users quickly appreciated the advantages of hanging models, and toilet bowls with installation began to be found more and more often in urban apartments and private homes. Moreover, they are installed not only in residential premises, but also in office, entertainment, public institutions, restaurants, hotels.

Advantages of using wall-mounted toilets with built-in installation instead of traditional floor analogues:

Since the tank is masked by a partition, the noise from the movement of water is less audible. Modern models take into account the level of drain intensity, which is reflected in the design of the button (key). There are two options for water flow: economical or full.

But there are also disadvantages that force buyers to purchase more familiar floor models.

These include:

• increase in the total cost due to the purchase of the installation;
• difficult access to communications, which becomes extremely inconvenient for preventive and repair work;
• reduction in the volume of the toilet room due to the construction of an additional wall;
• installation of construction and finishing work require skill and accuracy.

Deficiencies can be compensated for by precise marking, skillful installation work and a well-thought-out partition design.

If a convenient, but almost imperceptible revision hatch is built into the false wall, access to the pipes and the tank will be ensured, and the aesthetics of the interior will be respected.

Hanging toilet selection criteria

First of all, you need to find a kit that fully meets the installation conditions, or individual toilet and installation, suitable for each other in size and other characteristics.

The metal frame must be durable, coated with anti-corrosion paint and equipped with fasteners. Along with wall options, you can also consider corner

But more attention is paid to the part that comes out, that is, the toilet itself.

When choosing it, one should take into account such characteristics as:

• workmanship - in addition to traditional ceramics, there are glass, metal, plastic products, but porcelain or earthenware is still preferable;
• seat dimensions - from 54-centimeter compact products to 70-centimeter special toilets for the disabled;
• the form - Oval is more common, but there are rare design decisions of a round, rectangular or other configuration;
• bowl structure - we recommend choosing models that are comfortable to use with the anti-splash system or a gentle slope;
• color scheme - White is considered a classic, but today it is possible to purchase a product of any shade, and even with a pattern or pattern;
• flushing device - The circular system is much more efficient than direct flushing.

In addition to the standard set of characteristics, design features should be taken into account - for example, a convenient cover with a micro-lift and a double flush button.

The shape, color and size of the buttons also vary. If this reinforcement element does not come with the installation, it can be selected according to the wall cladding - in tone or in contrast

Expensive wall hung toilets differ from the budget ones not only by the material of manufacture and attitude to a well-known brand. As a rule, they are equipped with additional functions: the possibility of remote control, drying or blowing, aeration, heating. Some are a combination of toilet and bidet.

When choosing a manufacturer, you should rely on the respectability of the company, user reviews, the ability to replace the bowl, assortment. Especially popular is the plumbing brands Cersanit, Roca, Geberit, Villeroy & boch, Grohe, Jacob delafon, Vitra, Laufen, AM.PM.

Mounting Model Installation Instructions

The main installation guide is always an instruction that comes with both the toilet and the frame. Usually it looks like several diagrams or drawings with dimensions and procedures.

If you are not ready to decipher the schematic instructions yourself, it is better to contact experienced plumbers, since when installation of frame construction, pipes and bowls accuracy and qualification are very important.

Stage # 1 - preparatory work

Preparation includes the purchase of the necessary plumbing equipment, additional mounting parts.

Flax is useful for sealing, and silicone with a gun for processing compounds. Also, flax is often used as a plumbing sealant, but it needs to be trained to properly wrap

You also need to get the tool:

• punch + drill 10 mm;
• grinder;
• a set of keys, including gas and adjustable;
• a screwdriver;
• hammer;
• marking tool - tape measure, level, marker;
• soldering iron or press pliers - for welding pipe made of polypropylene or crimping metal pipes.

Which is better to choose: polypropylene or metal-plastic pipes learn from our recommended article.

When everything is prepared, we shut off the water and assemble the installation. Before mounting the frame, some mounting elements are installed on it - brackets, adapters, pipes. We connect the fitting to the tank hose.

Stage # 2 - installation installation

Before installation installations for hanging plumbing prepare the place - we make the connection of sewage pipes and water pipes, securely fasten them with clamps to the wall. Throughout the installation process, we remember that the structure will be sewn with drywall, so we carry out all the work responsibly.

There is a sticker on the frame with a marking indicating the maximum installation height.We are trying to comply with this value, we are calculating from the finishing floor - not from concrete, but from ceramic tiles. If it is not already laid, calculate the difference.

We monitor the location of the holes for mounting the bowl. As a result, it should be at a height of about 40 cm, if higher - it will be difficult to use the toilet, lower - inconvenient

We install the frame in place, adjust the height by adjusting the legs - weaken, and then tighten the adjustment bolts.

We insert the adapter for the sewer socket - a large black plastic corner, which is equipped with the frame. Later, you need to insert a nozzle from the toilet into it

During the “fitting”, we mark the attachment points, then we remove the frame, drill holes in the floor with a brown 10 mm.

They are also on the wall (capital), but here there are other fastenings - for studs that hold the frame at a certain distance from the wall.

We hammer the plastic plugs into the holes, install the installation in place, tighten the bolts. If the ends of the studs protrude outward, saw off the excess with a grinder. Along the way, we use the level and align the position of horizontal parts by adjusting the legs

We fasten the nuts, tighten, connect the tank valve. At the installation site of the button, we install a foam template, which is removed only after the partition is erected.

We clarify the distance between the mounting studs for the toilet (there are 2 options), screw them into the desired holes, put on the protective elements.

Stage # 3 - fixing the bowl

If the installation is installed correctly, bowl mounting not take much time. Typically, between these two steps, a partition or box is installed to mask the installation.

We measure the distance from the outlet of the pipes to the toilets of the toilet bowl, which are located in the inner part of the bowl facing the wall. We put on the pipes, push them all the way.

Since the studs and eyeliners were prepared at the installation installation stage, it remains to grease all toilet elements with special grease and install it on the fasteners. Last fix the seat

First, put on the washers, then just tighten the nuts.

Stage # 4 - Attaching the Flush Button

We remove the template from the foam, in its place we fix the plastic installation frame. We use the screws that are in the kit, and a screwdriver or screwdriver. Then we screw in the threaded rods that the button will control, adjust their position and fix.

Elements from the installation kit are perfectly matched to each other, so you don’t need to put much effort into it, but simply follow the instructions

The final touch is the installation of a decorative strip with a button. We apply it to the rods and press until it clicks. We check how the mechanism works.

After the completion of work, we complete the finishing activities. Do not forget to equip plumbing hatch for access to internal communications, otherwise at the first accident you will have to dismantle the partition.

Conclusions and useful video on the topic

Video # 1. Installation example of a suspended model:

Video # 2. Instructions for installing the bowl and installing the button:

Video # 3. Installation installation in the box:

Do-it-yourself installation is possible and permissible, but only if you have the skills to work with concrete and can read the instructions correctly. The consequences of improper installation are difficult to fix - you will have to completely disassemble the structure and demolish the partition.

If there is even the slightest doubt about your own skills, it is better to invite an experienced plumber. Do not forget that the manufacturer gives a 10 year warranty only on condition that the installation is done correctly, in compliance with all recommendations.

Want to talk about how you installed a hanging toilet and installation for it in your apartment or office? Have a desire to share technological nuances that will be useful to site visitors? Please write comments in the block below, post a photo and ask questions about the topic of the article.